E220-45PS Electric Rail Lubricator

2022-04-19

product introduction:
1. Engineering conditions
1.1. Installation location: rail side.
1.2. Supply voltage
Power supply: 220VAC, 50Hz, 3A.
Working power supply: 24VDC, power not higher than 100W.
1.3. Equipment use location: track within a radius of 500 meters
Arrangement of the two-track lubricator:
The lubricating pump station of the rail lubricator is located next to the track in the direction of the train, and the oil injection system is installed on the upper rail in the direction of the train. The special lubricating oil for wheel and rail is applied to the track. The supplier is responsible for conforming to the actual situation on site according to the information provided by the customer. system design and installation location.
In order to protect the escalating curve as much as possible and improve the smoothness of the train passing through the escalating curve of the track, we suggest that the ideal installation position of the lubricator is near the track and the straight track as close as possible to the straight and escalating point. The main engine of the lubricator is close to the construction power supply.
For special circumstances, please consult Chongqing Artes Machinery Co., Ltd., who can be responsible for the design and adjustment of the scheme according to the actual situation on site according to the information provided by the customer.
Three applicable occasions:
Subway, light rail, steel mill, wharf and other rail transportation occasions with external power supply. The lubricating part is the inner side of the curved outer rail, which can reduce the wear and prolong the service life by 2-5 times.

The technical indicators achievable by the orbit lubricator
1) Oil level monitoring, the system alarms when the oil level is too low.
2) The damage monitoring of the motor, the system alarms when there is a fault.
3) The damage monitoring of the track proximity switch, and the system alarms when there is a fault.
4) Statistics on the number of wheels and oil output of the equipment.
5) Various control modes can be selected: pump control mode, time control mode, etc.
6) The effective coating length is not less than 900 meters without wasting lubricant.
7) The proximity switch sensor of the lubricator will only sense metal, and will not sense when pedestrians pass by or operate at close range.
8) By adjusting the proper amount of oil output frequency and oil output of the lubricator, it can effectively prevent the oil applied to the rail tread and the lubricant overflowing to the track bed.
Technical requirements for lubricants
1) Excellent bearing capacity and extreme pressure wear resistance, four-ball extreme pressure test PD>4500, significantly reducing wheel and rail wear.
2) Light yellow ointment, excellent adhesion and adhesion, with good retention.
3) Excellent high and low temperature stability, wide operating temperature range, suitable for -30~+120℃ environment.
4) Excellent dustproof and anti-corrosion properties.
5) Excellent chemical stability and mechanical stability.
6) Excellent water resistance to ensure normal use in rainy and snowy weather conditions.
7) Excellent pumping performance, can better match with the lubricator, and will not block or corrode the lubricating system oil pump, oil pipe and oiling plate and other oil circuit systems.

Chongqing Artes Machinery Co., Ltd. was established on December 18, 2017. Its registered office is located at 5-43, Unit 7, Building 15, Chongqing Advertising Industrial Park, No. 18, Food City Avenue, Baoshenghu Street, Yubei District, Chongqing. The legal representative is Li Yeju. The business scope includes general items: technical service, technical development, technical consultation, technical exchange, technology transfer, technology promotion; production and sales: railway locomotive accessories, urban rail vehicle accessories, railway engineering accessories, hydraulic components and systems, lubrication components and systems ;Sales: lubricants, greases, chemical products, building materials, decorative materials (the above five items do not contain hazardous chemicals), automation equipment, mechanical equipment, hardware, office supplies and equipment, wires and cables, power tools, mechanical and electrical products; Warehousing services (excluding items prohibited by the state and inflammable and explosive items); manual loading and unloading, handling services; import and export of goods and technologies. (For projects subject to approval according to law, business activities can only be carried out after approval by relevant departments)

 

Contact Person:Liu Mengjiao

Telephone:+8613940525412

Email:cqats2021@gmail.com


》》》Online Store——Buy Now》》》

Disclaimer: This article is reproduced from other media. The purpose of reprinting is to convey more information. It does not mean that this website agrees with its views and is responsible for its authenticity, and does not bear any legal responsibility. All resources on this site are collected on the Internet. The purpose of sharing is for everyone's learning and reference only. If there is copyright or intellectual property infringement, please leave us a message.
©copyright2009-2020 British Weekly      Contact Us   SiteMap